Caulks & Sealants

Application Guidelines

Application Temperature:

65 to 80°F (18 to 27°C)

For General Cleaning:

1. Wear protective glasses or goggles, nitrile gloves and clothing that protects againstdermal exposure. Use only in a well-ventilated area.
2. Insert red spray activator into the valve stem of the can. Do not use in horizontal position.
3. With valve end of can down, slowly press trigger to dispense cleaner.

For Dispensing Gun Cleaning:

1. Always clean the basket adapter and other external parts thoroughly with Titebond Foam Cleaner before attaching a fresh can of foam adhesive or sealant. Flush dispensing gun with cleaner after every 10-20 cans of foam adhesive or sealant.
2. The dispensing gun MUST be stored with a pressurized can attached. For best results store Dispensing Gun with a fresh can of foam adhesive or sealant.
3. Hold red spray activator aside while screwing cleaner can into basket adapter.
4. Screw can until it will go no further. DO NOT overtighten.
5. Slowly pull the dispensing gun trigger until solvent extrudes from the gun. Release the gun trigger and let solvent soak in unit for one to two minutes.
6. Pull gun trigger and dispense solvent into suitable container (box, can, etc.).
7. Repeat procedure until only clear solvent appears from nozzle.
8. Refer to dispensing gun instructions for more information.

Limitations:

• Flush Dispensing Unit after every 10 to 20 cans of foam or adhesive
• Wear protective glasses or goggles, nitrile gloves and clothing that protects against dermal exposure.
• Use only in a well ventilated area.
• Do not use in horizontal position.

For questions, please call our Help Line at 1.800.347.4583 or visit us at Titebond.com.