Woodworking Glues

Application Guidelines

Application Temperature:

Above 50°F (10°C)

Open Assembly Time:

10 minutes (70°F./50% RH)

Total Assembly Time:

20-30 minutes (70°F./50%RH)

Minimum Required Spread :

Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure:

Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application:

Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.

Cleanup:

Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations:

Titebond Genuine Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.