TITEBOND QUICK & THICK MULTI-SURFACE GLUE


Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast sp...

more

Watch Video

Features & Benefits

check_circle
2X Faster – 3X Thicker than traditional PVA glues
check_circle
Dries clear – Paintable
check_circle
Ideal for the woodshop, home and craft projects
check_circle
Fill small cracks and gaps
check_circle
Unaffected by finishes
check_circle
Excellent sandability on wood
check_circle
Designed for interior projects
check_circle
Water cleanup & non-toxic
check_circle
Nonflammable — No offensive odor
check_circle
Conforms to ASTM D4236

Application Guidelines

Application Temperature:
Above 50°F.
Open Assembly Time:
3-5 minutes (70°F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller, speader or brush.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Thixotropic polyvinyl acetate
Calculated VOC
2.4 g/L
State
High-viscosity liquid
Weight Per Gallon
9.0 lbs.
Color
White
Dried Film
Clear
Flashpoint
> 200°F.
Solids
60%
Freeze/thaw Stability
Stable up to 2 cycles
Viscosity
36,500 cps
pH
4.8
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F.