TITEBOND ALL PURPOSE WHITE GLUE


A versatile, professional-grade formula now available for hobbyists, crafters and school teachers alike! It provides strong initial tack, excellent strength, and a fast set on wood, paper, fabrics, pottery and more! Titebond All Purpose White Glue is safe-to-use! It cleans up with water and conforms to ASTM D4236. Performance plu...

more

Features & Benefits

check_circle
Ideal for crafts, home repairs and general woodworking!
check_circle
Fast Set
check_circle
Versatile
check_circle
Water Resistant
check_circle
Dries clear
check_circle
Paintable
check_circle
Water cleanup

Application Guidelines

Application Temperature:
Above 50°F (10°C)
Open Assembly Time:
5 minutes (70°F / 50% RH)
Total Assembly Time:
10-15 minutes (70°F / 50% RH)
Minimum Required Spread :
7 mils (typical)
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method of Application:
Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup:
Damp cloth while glue is wet. Scrape of and sand dried excess.
Limitations:
Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING.

Physical Properties

Type
Polyvinyl Acetate Emulsion
Calculated VOC
< 4 g/L
State
Liquid
Weight Per Gallon
9.1 lbs.
Color
White
Dried Film
Clear
Flashpoint
> 200°F
Solids
46%
Freeze / Thaw Stability
Stable
Viscosity
8,500 cps.
pH
4.7
Chalk Temperature
To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers below 75°F

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,550 psi 50%
150°F. Overnight 1,600 psi 15%

Caution Statement

CAUTION. EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, Flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.