TITEBOND ROOF PLUS SEALANT

Titebond Roof Plus Sealant is a water-resistant, solvent-based, elastomeric rubber sealant designed for roofing applications such as asphalt shingles, metal trim, solar roof systems, architectural metals, painted metals, aluminum and general roofing applications. It is resistant to dust, dirt and stains and is paintable. Sealant can be applied to itself (resealable).

Features & Benefits

  • IDEAL FOR: Sealing metal trim, solar roof systems, architectural metals and general roofing applications.
  • SEALS: Metal, aluminum, asphalt, shingles, masonry, wood and most common building materials.
  • Fast drying
  • Designed for dynamic joint movement
  • Tools and cleans up easily
  • Adhesive or sealant use
  • Excellent performance and flexibility on most materials
  • Exceptional flexibility - Will not crack
  • UV resistant

Specifications

Exceeds:
  • ASTM C920 Type S Grade NS Class 12.5 Use T, NT, M, A and O
  • Federal Specification TT-S-00230C Type II Class B

Application Guidelines

  • Application Temperature: Above 20°F (-7°C)
  • Service Temperature Range: -40°F to 180°F (-40°C to 82°C)
  • Method of Application: Cartridge/caulking gun
  • Tooling Time: For a 1/4" bead, approximately 10-15 minutes
  • Working Surfaces: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Cut tip to desired bead width and shape and place in cartridge gun. 3. Apply generously as needed. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Painting: The sealant should be dry to the touch and ready to paint in 2 hours
  • Cleanup: Clean uncured material with xylene or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Synthetic Elastomeric Rubber
  • Calculated VOC: 315 g/L (32%)
  • Color: Clear
  • Solids: 68%
  • Flashpoint: 80°F
  • Viscosity: 700,000 to 1,000,000 cps.
  • Freeze / Thaw Stability: Stable
  • Storage Life: 24 months in a dry location at or below 75°F

Limitations

Air, sealant and surface temperature should be above 20°F. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2 hours. Do not thin or use for exterior glazing. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
32410370830324131003708303241010.1 Oz. Cartridge9.6412108

Warranty Statement

Liability is limited to product replacement only.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International