Features & Benefits

---

• Recommended For: Demanding interior/exterior construction, installation and repair projects.
• Compatible Materials: Common building materials including wet, frozen and treated lumber, stone, concrete, metal, landscaping blocks, brick, masonry, drywall, plastic, foam and mirrors
• Builds strength faster than common construction adhesives
• Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
• Ultimate strength and durability
• No drool and less mess
• Cold weather extrusion
• Bonds virtually any material
• Smooth, full bodied bead
• Waterproof
• All weather
• Will not become brittle, crack or lose strength

Application Guidelines

---

• Application Temperature: 32°F to 120°F
• Service Temperature Range: -20°F to 250°F
• Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
• Application: Cut tip on slant for 1/4’’ to 3/8’’ bead. For subfloors, bead size is determined by subfloor material and width of joist. Cut tip straight across to produce between a 3/8” to 1/2” bead, to ensure full width of coverage (squeeze out) on joist. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 10-20 minutes based on environmental conditions. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has cured. Note: For subfloors, apply adhesive to joists for one sheet at a time. Apply enough adhesive to joists to allow for full coverage and sufficient squeeze out when panels are placed. Do not slide panels in place as this can scrape adhesive off of joists. Nail or screw each sheet as recommended by the American Plywood Association.
• Cleanup: Tools and adhesive may be cleaned with mineral spirits before adhesive dries. Follow solvent vendor's precautions. If dried, removal will require scraping or other mechanical means.

Physical Properties

---

• Type: One-component, moisture-cured polyurethane
• State: Medium-viscosity mastic
• Color: Brown
• Open Time: Approximately 10-20 minutes, depending on environmental conditions
• Solids: 98%
• Viscosity: 150,000 cps.
• Calculated VOC: < 50 g/L
• Flashpoint: > 200°F
• Freeze / Thaw Stability: Will not freeze
• Storage Life: 18 months from date of manufacture
• Odor: Low

Limitations

---

Not intended for continuous submersion. Not intended for polyethylene, polypropylene, silicone, PTFE or other non-stick plastics. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. This moisture cured adhesive may exhibit a reduction in working time when exposed to high heat and humidity. When using on non-porous substrates, mist with water to speed curing.

Product SKUs

---

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet
4221	037083042214	10037083042211	10 Oz. Cartridge	11.99	12	108
4222	037083042221	10037083042228	28 Oz. Cartridge	32.32	12	44

Warranty Statement

---

Learn about all the products included in the industry's Best Subfloor Adhesive Warranty.

---

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

---

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com