Titebond on Instagram Titebond on Facebook Titebond on YouTube MSDS
Loading

Titebond Solvent Free Clear Pressure Sensitive Adhesive


Titebond Solvent Free Clear Pressure Sensitive Adhesive is a latex-based, clear thin spread formula for the installation of vinyl, vinyl composition and asphalt tiles, as well as foam-backed hardwood parquet tiles. It combines a fast tack with a long open time.

Titebond Solvent Free is environmentally superior and contains no ozone-depleting chemicals. It is nonflammable, emits no harmful fumes and cleans up with water.

  • Ideal for paper and felt backed vinyl, vinyl composition and carpet tiles

  • Quick grab - Strong bond

  • Water-resistant - Freeze/thaw stable

  • Environmentally safe - Nonflammable

Type: Latex Calculated VOC: 16.2 g/L State : Low viscosity mastic Weight Per Gallon : 9.2 lbs. Color : Beige Flashpoint : > 200°F. Solids : 65% Freeze/thaw Stability : Stable (5 cycles @20 °F.) Viscosity : Roller, trowel, spray grade Storage Life : 24 months in tightly closed containers at 75°F.
Coverage
1/32" U-notch trowel- approximately 250 sq. ft. per gallon
1/16" square-notch trowel- approximately 150 sq. ft. per gallon
Spray, roller or brush- approximately 125-150 sq. ft. per gallon

*Refer to Application Guidelines for trowel recommendations.

Application Temperature

Above 65°F. for adhesive and substrates


Service Temperature Range

40°F. to 120°F.


Method of Application

Airless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.


Working Time

72 hours maximum


Working Surfaces

Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to cleaning water.


Cleanup

Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.


Do not use directly over or under solid vinyl tile or sheet goods. Remove old vinyl flooring before laying new floor. Keep from freezing. Subfloor and materials should be at least 65°F. for 24 hours before and after installation.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
51244 Gallon Pail39.59037083051247 136
5126Gallon Can20.3103708305126110037083051268275
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam