Titebond on Facebook Titebond on You Tube MSDS
Loading

Titebond White Glue


Titebond White Glue is an exceptionally strong, economical white glue that sets faster than most other comparable glues. Its versatile formula is ideal for general woodworking applications, as well as many other porous and semi-porous materials.

Titebond White Glue provides a strong initial tack and sets fast to reduce clamp time. It provides a translucent glue line, offers excellent sandability and is unaffected by finishes. Titebond White Glue is easy to use, non-toxic and cleans up with water.

  • Fast set - Strong bond

  • Safe - no solvent vapors

  • Water cleanup & non-toxic

  • Versatile

  • Dries clear and colorless

  • Sets faster than most other white glues

Type: Polyvinyl acetate emulsion Calculated VOC: 10.7 g/L State : Liquid Weight Per Gallon : 9.1 lbs Color : White Chalk Temperature: Approximately 50°F. Dried Film: Translucent Flashpoint : > 200°F. Solids : 45% Freeze/thaw Stability : Stable Viscosity : 7000 cps pH : 4.7 Storage Life : 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 3,550 psi 50%
  150°F. Overnight 1,600 psi 15%


Application Temperature

Above 50°F.


Open Assembly Time

5 minutes (70°F./50%RH)


Total Assembly Time

10-15 minutes (70°F./50%RH)


Minimum Required Spread

7 mils (typical)


Required Clamping Pressure

Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)


Method of Application

Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.


Cleanup

Damp cloth while glue is wet. Scrape off and sand dried excess.


Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
15026Gallon Jug19.2703708305026410037083150268263
50275 Gallon Pail48.33037083050271 124
502855 Gallon Drum539.31037083050288 14
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam