Titebond No-Run, No-Drip Wood Glue
Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue.
Titebond No-Run, No-Drip provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.
Download Titebond No-Run, No-Drip Wood Glue Sales Sheet
Conforms to ASTM D-4236
- Thick - No-runs, No-drips
- Versatile - Bonds most porous and semi-porous materials
- Fill small cracks and gaps
- Strong initial tack - Fast set
- Unaffected by finishes
- Excellent sandability
- Good heat resistance
- Nonflammable - No offensive odor
Type: Thixotropic polyvinyl acetate
Calculated VOC: 2.4 g/L
State : High-viscosity liquid
Weight Per Gallon : 9.0 lbs.
Color : Beige
Chalk Temperature: Approximately 50°F.
Dried Film: Translucent
Flashpoint : > 200°F.
Solids : 60%
Freeze/thaw Stability : Stable up to 2 cycles
Viscosity : 36,500 cps
pH : 4.8
Storage Life : 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
Open Assembly Time
3-5 minutes (70°F./50%RH)
Total Assembly Time
10-15 minutes (70°F./50%RH)
Minimum Required Spread
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
No caution information is needed. Please refer to the Safety Data Sheet for further information.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|2404||16 Oz. Bottle||15.14||037083024043||10037083024040||12||100