Titebond on Facebook Titebond on You Tube MSDS
Loading

Instant Bond Wood Adhesive Thick Adhesive


Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The thick viscosity product offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.

  • Fast set - Eliminates clamping or reduces clamp time

  • Bonds stronger than wood

  • Excellent heat and solvent-resistance

  • Unaffected by finishes

  • Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more

  • 2 year shelf life

  • Triple distilled for purity & consistency

  • Impact-resistant

  • No-clog applicator for easy use and waste reduction

  • Ideal for bonding miter joints on MDF and porous woods

  • Designed for finish & trim carpentry

  • High viscosity allows time for positioning parts

  • MIL Spec (A46050C) Type II, Class 3

Type: Ethyl cyanoacrylate Reactive VOC: 20 g/L State : Liquid Weight Per Gallon : 9.18 lbs. Color : Clear Flashpoint : > 178° F. Dried Film: Translucent Freeze/thaw Stability : Stable Solids : 100% Specific Gravity: 1.1 Viscosity : 2,400 cps Storage Life : 2 yrs in tightly closed bottles stored between 40° & 75°F

Bond Strength ASTM D-1002
Temperature Shear Strength psi
Room Temperature Between 2800 and 4200 psi depending on substrate tested


Application Temperature

Above 50°F.


Cure Speed

10 second handling, 8 second set, 30 second cure. *Full cure in 8 hours.


Service Temperature Range

-65° to 200° F.


Cleanup

Use acetone. Follow solvent vendor’s precautions.


Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.
DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.
Part No.SizeWeight(lbs.)UPCCase UPCUnits Per PackagePackages Per Pallet
62212 Oz. Bottle2.600370830622121003708306221915210
62224 Oz. Bottle3.610370830622291003708306222610270
  • woodworking
  • construction
  • caulk
  • flooring
  • Titebond Woodglues
  • PROVantage
  • WeatherMaster
  • Green Choice
  • Titebond Premium
  • XtremeFoam