TITEBOND SOLVENT FREE CLEAR PRESSURE SENSITIVE ADHESIVE

Titebond Solvent Free Clear Pressure Sensitive Adhesive is a latex-based, clear thin spread formula for the installation of vinyl, vinyl composition and asphalt tiles, as well as foam-backed hardwood parquet tiles. It combines a fast tack with a long open time. Titebond Solvent Free is environmentally superior and contains no ozone-depleting chemicals. It is nonflammable, emits no harmful fumes and cleans up with water.

Features & Benefits


  • Ideal for paper and felt backed vinyl, vinyl composition and carpet tiles
  • Quick grab - Strong bond
  • Water-resistant - Freeze/thaw stable
  • Environmentally safe - Nonflammable

Specifications


    Application Guidelines


    • Application Temperature: Above 65°F. for adhesive and substrates
    • Service Temperature Range: 40°F. to 120°F.
    • Method of Application: Airless mastic spray gun, roller, trowel or brush. For smooth surfaces, use a
      1/32" U-notch trowel. For rough surfaces, use a 1/16" square-notch trowel.
    • Working Time: 72 hours maximum
    • Working Surfaces: Surface must be dry and free of any material that may deter adhesion. Cut and fit all material before applying adhesive. Apply adhesive. Adhesive is ready when it becomes nearly clear and no longer transfers to the finger when lightly touched. Set tiles in place carefully because they will not slide. Roll within 12 hours. Allow adhesive to dry well before exposing installations to cleaning water.
    • Cleanup: Clean tools and excess adhesive with water while wet. If adhesive has dried, use mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent in an out-of-the-way area to make sure it will not mar or attack the surface.

    TROWEL RECOMMENDATIONS AND COVERAGE

    FLOORING TYPE TROWEL SIZE TROWEL TYPE COVERAGE
    MOST APPLICATIONS SPRAY, ROLLER OR BRUSH   APPROXIMATELY 125-150 SQ. FT. PER GALLON
    SMOOTH SURFACES 1/32" U-NOTCH APPROXIMATELY 135 SQ. FT. PER GALLON
    ROUGH SURFACES 1/16" SQUARE-NOTCH APPROXIMATELY 150 SQ. FT. PER GALLON
    CLEAN TROWEL WITH WATER OFTEN TO PREVENT ADHESIVE BUILD-UP.

    Physical Properties


    • Type: Latex
    • Calculated VOC: 16.2 g/L
    • State : Low viscosity mastic
    • Weight Per Gallon : 9.2 lbs.
    • Color : Beige
    • Flashpoint : > 200°F.
    • Solids : 65%
    • Freeze/thaw Stability : Stable (5 cycles @20 °F.)
    • Viscosity : Roller, trowel, spray grade
    • Storage Life : 24 months in tightly closed containers at 75°F.

    Product SKUs


    Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
    51240370830512474 Gallon Pail39.59136

    Caution Statement


    CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye and skin contact areas persists, contact physician. For additional information, refer to Safety Data Sheet.
    KEEP OUT OF THE REACH OF CHILDREN.

    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

    2020 Bruck Street, Columbus, Ohio 43207
    CUSTOMER SERVICE 1-800-669-4583
    TECH SERVICE 1-800-347-4583
    www.titebond.com

    Franklin International