TITEBOND NO-RUN, NO-DRIP WOOD GLUE

Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue. Titebond No-Run, No-Drip provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.

Features & Benefits


  • Thick - No-runs, No-drips
  • Versatile - Bonds most porous and semi-porous materials
  • Fill small cracks and gaps
  • Strong initial tack - Fast set
  • Unaffected by finishes
  • Excellent sandability
  • Good heat resistance
  • Nonflammable - No offensive odor


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236

Application Guidelines


  • Application Temperature: Above 50°F
  • Open Assembly Time: 3-5 minutes (70°F./50%RH)
  • Total Assembly Time: 10-15 minutes (70°F./50%RH)
  • Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
  • Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
  • Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,000 psi 7%
150°F. Overnight 650 psi 0%

Physical Properties


  • Type: Thixotropic polyvinyl acetate
  • Calculated VOC: 2.4 g/L
  • State: High-viscosity liquid
  • Weight Per Gallon: 9.0 lbs.
  • Color: Beige
  • Dried Film: Translucent
  • Flashpoint: > 200°F
  • Solids: 60%
  • Freeze/thaw Stability: Stable up to 2 cycles
  • Viscosity: 36,500 cps
  • pH : 4.8
  • Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
  • Storage Life: 24 months in tightly closed containers at 75°F

Limitations


Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Product SKUs


Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
24040370830240431003708302404016 Oz. Bottle15.1412100

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International