TITEBOND DURAMASTER SEALANT

Titebond® DuraMaster™ Sealant is the first high performance, water-based elastomeric sealant with 100% joint movement. This revolutionary sealant offers excellent adhesion to most common building materials. It can span gaps up to 2” wide. It is paintable, UV resistant, mold and mildew resistant, easy to tool and cleans up with water. *Clear offers 25% joint movement.

Features & Benefits


SPECIFICATIONS

Exceeds:
  • FEDERAL SPECIFICATION TT-S-00230C
  • ASTM C920, CLASS 100/50 (WHITE AND COLORS)
  • ASTM C920, CLASS 25 (CLEAR)
  • ASTM C834, TYPE OP, GRADE -18°C
Meets:
  • LEED v4.1 (WHITE AND COLORS)
  • AAMA 803.3-16 TYPE I (WHITE AND COLORS)
  • AAMA 808.3-16 TYPE I (WHITE AND COLORS)

Application Guidelines


  • Application Temperature: Above 40°F and below 120°F
  • Service Temperature Range: -25°F to 180°F (-31°C to 82°C) white and colors, 0°F to 160°F (-18°C to 71°C) clear.
  • Method of Application: Cartridge/caulking gun
  • Tooling Time: For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
  • Application Directions: 1. Surfaces must be cleaned down to the original substrate and free from any contaminant that may prevent adequate adhesion. 2. Remove nozzle and puncture foil seal. Reattach and cut nozzle at 45° angle to desired bead width. Place in caulking gun. 3. Apply sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test proposed use with all substrates to determine suitability.
  • Joint/gap Specifications: 2" maximum width and 1/4" maximum depth.
  • Dry Time: 2-4 hours.
  • Cleanup: Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties


  • Type: Water-based
  • Non-reactive VOC: <50 g/L (<1.5%) white, colors and clear
  • Color: White, clear, and colors
  • Solids: 73% white and colors, 61% clear
  • Flashpoint: Solvent free/ Not applicable
  • Freeze / Thaw Stability: Stable, Over 20 cycles
  • Viscosity: 350,000 cps white and colors; 550,000 cps clear
  • Storage Life: 24 months in tightly closed containers between 50°F to 80°F

Limitations


Do not apply on exterior surfaces if rain is expected within 24 hours. Air, sealant, and surface temperatures should be above 40°F and below 120°F. Protect from rain for 24-48 hours after application. Dry time may be extended in humid or cold conditions. The sealant should be dry to the touch and ready to paint in 2-4 hours with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/4”, use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Sealant may appear to have a different tint/color when initially extruded until it is fully dried/cured. Not designed for continuous submersion or use below the waterline. Not for use in areas where staining of porous substrates may be visible. Test before using on concrete, marble, granite, wallpaper and other porous surfaces. Store unused product in dry location at or below 100°F (37.8°C). Storage at temperatures above 120°F (48.9°C) may cause a reaction in the sealant resulting in a granulated texture. Not for use with nail holes or butt joints. For questions, please call our Help Line at 1-800-347-4583 or visit us at Titebond.com.

Product SKUs


Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
320010370833200151003708332001210.1 Oz. Cartridge - White12.0112108
320110370833201141003708332011110.1 Oz. Cartridge - Black11.8312108
320210370833202131003708332021010.1 Oz. Cartridge - Medium Bronze11.9212108
320310370833203121003708332031910.1 Oz. Cartridge - Dark Bronze11.8612108
320410370833204111003708332041810.1 Oz. Cartridge - Gray12.0512108
320510370833205101003708332051710.1 Oz. Cartridge - Clay11.9812108
320610370833206191003708332061610.1 Oz. Cartridge - Ironstone11.9212108
320710370833207181003708332071510.1 Oz. Cartridge - Almond11.9712108
320810370833208171003708332081410.1 Oz. Cartridge - Redwood11.8612108
320910370833209161003708332091310.1 Oz. Cartridge - Woodtone11.9412108
321110370833211111003708332111810.1 Oz. Cartridge - Dark Brown11.9112108
321210370833212101003708332121710.1 Oz. Cartridge - Tan11.9712108
321310370833213191003708332131610.1 Oz. Cartridge - Clear11.0012108
321410370833214181003708332141510.1 Oz. Cartridge - Beige11.8812108

Warranty Statement


Limited Warranty: If not satisfied with product performance when used as directed, according to our sealant installation guidelines, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International