Titebond Kitchen & Bath Sealant is a non-reactive, high-performance, modified acrylic formula designed to permanently seal high-moisture areas found in kitchens and baths. This flexible sealant offers strong, watertight adhesion and is safe for food preparation areas when fully cured.

Features & Benefits

  • IDEAL FOR: Sealing around tubs, showers, sinks and countertops.
  • SEALS: Vinyl, ceramic tile, porcelain, plastic, painted surfaces, aluminum, glass, marble, brick, wood and most common building materials.
  • For use on tubs, showers, sinks and countertops
  • Resistant to dirt, water, stains and mildew
  • Once cured, will not shrink or discolor over time
  • Excellent flexibility & adhesion
  • Permanently seals


White Exceeds:
  • ASTM C834 Type OP Grade 0°C
  • FDA 21-CFR-177.2600
Clear Exceeds:
  • ASTM C834 Type C Grade NF
  • FDA 21-CFR-177.2600

Application Guidelines

  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: 0°F to 160°F (-17°C to 71°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 15 minutes for a 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Painting: The sealant should be dry to the touch and ready to paint in 4-6 hours.
  • Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Modified Acrylic
  • Calculated VOC: <50 g/L (<1.5%)
  • Color: White and clear
  • Solids: 72% white, 60% clear
  • Flashpoint: Solvent free/Not applicable
  • Freeze / Thaw Stability: Stable
  • Viscosity: 250,000 cps
  • Storage Life: 24 months in a dry location at or below 75°F


Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Allow at least 24 hours before exposing to water. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 4-6 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
17010370830170141003708301701110.1 Oz. Catridge - White12.3712108
17110370830171131003708301711010.1 Oz. Cartridge - Clear10.5012108

Warranty Statement

Liability is limited to product replacement only.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International