Titebond Ultimate TiteGrab Adhesive is an advanced polymer formula, specifically designed to decrease installation time of vertical applications, with twice the initial bond strength of most other similar adhesives. It grabs heavy materials quickly, reducing time and amount of bracing, and ultimately achieves a strong, permanent bond to porous and non-porous substrates. It bonds to vertical surfaces without slippage, eliminating the need for secondary support on the majority of applications. This 100% waterproof, low odor formula is designed for both interior and exterior projects, and is water, frost and heat resistant from temperatures of 0-200°F. It is solvent free, has a quick cure time, and can even be used on damp or wet surfaces. Titebond Ultimate TiteGrab Adhesive is uniquely designed for bonding most building substrates including large panels, wallboards and mirrors. Ideal for bonding brick slips, claddings and sanitary fixtures. It can also be used to fix dado rails, windowsills, decorative moldings; it will adhere to virtually everything including wood, natural stone, mirrors, concrete, metal, mortar, bricks, gypsum and glass.

The bonding power of Titebond® Ultimate TiteGrab™ Adhesive is ideal for bonding insulation pins to most building materials and can support one insulation pin holding 3 lbs. of weight in 17 minutes, 5 lbs. of weight in 35 minutes and the pin can be bent after 2.5 hours without any loss of adhesion.

Features & Benefits

Application Guidelines

  • Application Temperature: 0°F to 120°F (60°F to 90°F for best results). Above 90°F use additional support for 24 hours.
  • Service Temperature Range: -40°F to 275°F
  • Working Time: 10 minutes, depending on temperature and humidity.
  • Application Conditions: Surfaces must be clean, dry and free from dust, grease and other loose material that may prevent adhesion.
  • Coverage: 9.5 fl. oz. cartridge equates to 210 linear inches and the substrate coverage is 2.5 inches of standard sized bead per pound of substrate.
  • Method of Application: Cut across tube’s nozzle base and screw on the included v-notch applicator tip, which must be used to ensure correct depth of adhesive is extruded. Place in premium cartridge gun, as material is highly viscous. Hold cartridge gun at a 90° angle relative to substrate surface. The notch of the applicator should form a ridge on top of the adhesive bead when applied correctly. Apply adhesive coverage based on substrate weight to one of the surfaces in a continuous, horizontal bead, staying 1/2 inch from the outside edge. Correct bead placement is achieved by dividing total bead coverage into equal lengths of a minimum of three beads at least 1.5 inches separating each bead centered on the substrate. For questions about bead placement, contact Technical Service at 1.800.347.4583. Press surfaces firmly together with a slight twisting motion and firmly hold for 5 seconds. NOTE: On extremely heavy items, temporary support may be necessary during the curing process. Certain large applications may require additional permanent bracing. Mechanical fixings should always be used in overhead applications. Use only in well-ventilated areas.
    Click here to see TiteGrab install a 40 pound paver.
  • Cleanup: Tools and adhesive may be cleaned with mineral spirits or acetone when uncured. Follow solvent vendor’s precautions. Once cured, adhesive must be scraped from surface.

Physical Properties

  • Type: Advanced Polymer
  • Calculated VOC: < 4 g/L (0.26% w/v)
  • Color: White
  • Weight Per Gallon: 13.64 lbs.
  • Odor: Low
  • Flashpoint: > 212°F
  • Storage Life: 12 months from manufacture date in tightly closed containers at 75°F


Do not use when temperature or materials are below 40°F. Do not use on plastic, rubber or asphalt. Not intended for use around pools, chlorides or for continuous submersion. Yellowing may occur in the dark. Not intended for direct contact with flames or fire brick. Extreme temperatures may affect load dependence of heavier materials. For mirrors and other heavy vertical applications adhesive must be used with a permanent mechanical fastening system. Not suitable as joint sealant. Not paintable with alkyd resin paints. Porous surfaces may require a primer. Adhesion tests prior to application are recommended. For additional questions or recommendations, please contact Technical Service at 1.800.347.4583 or visit us at Titebond.com.

Among others, not recommended for applications on PE, PP, PC, PMMA, PTFE, neoprene and bituminous substrates. Not recommended for continuous underwater applications or expansion joints. Not suitable in combination with chlorides (pools). Yellowing may occur in the dark. Not suitable as joint sealant. Not paintable with alkyd resin paints. Porous surfaces may require a primer. Adhesion tests prior to application are recommended. It is the user’s responsibility to determine suitability. Store between 40°F (5°C) and 78°F (25°C) in cool, dry conditions.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
6701037083067019100370830670169.5 Oz. Cartridge13.6412132

Caution Statement

WARNING: Suspected of damaging fertility or the unborn child. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid contact with skin and clothing. Wear protective gloves, eye or face protection and protective clothing. Prolonged or repeated contact may dry skin and cause irritation. Wash thoroughly after handling. FIRST AID: If exposed or concerned: Get medical attention. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Dispose of contents and container is accordance with local, regional, national, and international regulations. For additional information, refer to Safety Data Sheet.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International