TITEBOND 720 CONTRACT GRADE MULTI-PURPOSE ADHESIVE

Titebond® 720 is an environmentally superior, latex flooring adhesive with fast tack. It may be used with conventional carpets and felt back resilient sheet goods over standard construction surfaces. This products formulation is designed for floor coverings that require frequent tear out and replacement. This product has lower bond strength to accommodate this need. It is not recommended for use with extra thick sheet goods or with curl memory. Titebond 720 contains no volatile solvents, hazardous materials or carcinogens. There is no unpleasant odor. It is guaranteed against discoloration of resilient sheet goods. It is freeze/thaw stable, nonflammable, water-resistant and non-toxic.

Features & Benefits


  • Designed for carpet, felt back sheet goods, cork and rubber tile
  • Fast tack
  • Environmentally superior
  • Designed for light traffic areas
  • Lower permanent bond strength designed for easy replacement
  • Freeze/thaw stable
  • Water-resistant
  • Nonflammable
  • Non-toxic

Specifications


    Application Guidelines


    • Suitable Substrates: Refer to the flooring manufacturer’s specific recommendations for suitable substrates. Porous: Concrete, well-bonded cementitious underlayments, APA grade underlayment plywood (untreated) and radiant-heated subfloors where temperatures do not exceed 85°F (29.4°C) on all grade levels. Also can be used over well-bonded, properly primed gypsum underlayments (above-grade only). Non-porous: Ceramic tile, terrazzo, marble, certain epoxy coatings and existing well-bonded resilient flooring (not perimeter bonded or cushion-backed). Please note that all substrates must be sound, solid and well-bonded.
    • Subfloor Preparation: All substrates must be clean, dry, structurally sound, properly cured and free of dirt, oil, paint, old adhesive, wax, sealers and curing agents. General scouring with 20 grit or #3 1/2 open-coat sandpaper will remove most compounds. All loose materials must be vacuumed from the surface after scouring. The subfloor must be flat to a tolerance of 3/16” in a 10’ radius. Grinding concrete floors is preferred over the use of filling compounds. If filling/flattening compounds are used, they must be Portland-based cementitious material and have a compressive strength equal to or greater than 3000 psi when cured. Moisture level in concrete subfloor will fluctuate. Any cementitious material used must be rated for the highest moisture content possible. Consult the cementitious material manufacturer’s application directions. Use of adhesive over lightweight concrete and all gypsum-based materials requires the use of an approved concrete primer prior to application of adhesive.
    • Floor Covering Recommendations: Titebond 720 is designed for carpet with polypropylene woven, woven, unitary, jute, latex unitary, foam, sponge, polyurethane, hot melt, rubber backings, latex, soft backed unitary. It also works on tile including: cork tile, rubber tile, pure vinyl tile. Sheet Goods: felt, paper, rubber backings. It may also be used with sheet goods with mineral, felt, paper or rubber backings.
      CARPET DIRECTIONS: Lay carpet into wet adhesive within 15 minutes after adhesive application, in order to ensure adhesive transfers to backing. In the case of sealed surfaces, it may be required to allow adhesive enough open time to become tacky to the touch before laying the carpet. After installation is complete, roll carpet with a lightweight roller or a carpet tube.
      SHEET GOODS: Lay sheet goods into wet adhesive within 10 minutes after adhesive application. Lift corner periodically to determine if adhesive is transferring to goods backing. Immediately after installation, roll the floor with a linoleum roller, working from center towards edges to expel entrapped air. For “hard to hold” curled goods, allow adhesive to tack up to the touch before laying goods in order to promote quick adhesion.
    • Cleanup: Allow adhesive to dry well before exposing installations to cleaning water. Use water to remove adhesive spots and clean tools.

    TROWEL RECOMMENDATIONS AND COVERAGE

    FLOORING TYPE TROWEL SIZE TROWEL TYPE COVERAGE
    CARPET 3/32" SQUARE-NOTCH APPROXIMATELY 135 SQ. FT. PER GALLON
      1/8" SQUARE-NOTCH APPROXIMATELY 99 SQ. FT. PER GALLON
    TILE 1/16" SQUARE-NOTCH APPROXIMATELY 150 SQ. FT. PER GALLON
      3/32" SQUARE-NOTCH APPROXIMATELY 135 SQ. FT. PER GALLON
    SHEET GOODS 1/16" SQUARE-NOTCH APPROXIMATELY 150 SQ. FT. PER GALLON
    CLEAN TROWEL WITH WATER OFTEN TO PREVENT ADHESIVE BUILD-UP.

    Physical Properties


    • Type: Latex
    • Calculated VOC: 28.60 g/L
    • Color : Beige
    • Flashpoint : > 200 °F.(Pensky-Martin Closed Cup)
    • Solids : 66%
    • Freeze/thaw Stability : Stable (5 cycles at 20 °F.)
    • Viscosity : Trowel grade
    • Weight Per Gallon : 10.2 lbs.
    • Storage Life : 24 months in tightly closed container

    Product SKUs


    Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
    92040370830920424 Gallon Pail44.12136

    Caution Statement


    CAUTION. Causes skin and eye irritation. Wear protective gloves, and eye or face protection. Wash hands thoroughly after handling. FIRST AID: IF ON SKIN: Wash with plenty of soap and water. Wash contaminated clothing before reuse. IF SKIN IRRITATION OCCURS: Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses and continue rinsing. IF EYE IRRITATION PERSISTS: Get medical attention. Dispose of contents and container in accordance with all local, regional, national and international regulations. For additional information, refer to Safety Data Sheet.

    Warranty Statement


    Franklin International will honor the applicable terms of any resilient floor manufacturer’s current published adhesive warranty or subfloor moisture warranty (where applicable) when the flooring was installed using Titebond 720 Contract Grade Multi-Purpose Adhesive in accordance with product instructions and the instructions of the resilient floor manufacturer.*

    Franklin International will also warrant Titebond 720 to be free from defects in materials and workmanship for a period of one year from the date of manufacture, if the product has been installed in accordance with the Franklin Specification Guide and the installation instructions furnished with the product. In the event of loss of adhesion of Titebond 720 due to product defect, Franklin International will reimburse the customer for the cost of labor and materials necessary to repair or replace the affected area(s) of the installed resilient flooring.

    * Any and all addendums or changes to the vinyl floor manufacturer’s warranties will be reflected in the execution of Franklin International’s warranty immediately upon release by the vinyl floor manufacturer. The effective date of said changes and addendums will dictate coverage by Franklin International in relations to the date of installation.

    As Franklin International is honoring the applicable terms of all vinyl floor manufactures’ current published warranties, Franklin International will also require the same job site preparations and installation instructions that accompany each warranty in question.

    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

    2020 Bruck Street, Columbus, Ohio 43207
    CUSTOMER SERVICE 1-800-669-4583
    TECH SERVICE 1-800-347-4583
    www.titebond.com

    Franklin International