WEATHERMASTER ULTIMATE MP TEXTURED SEALANT

Titebond® WeatherMaster™ ULTIMATE MP Textured Sealant is an elastic moisture curing sealant with a textured consistency perfect for use in most construction materials, including asphalt, stucco, concrete, mortar, wood, brick and stone. It will even adhere to challenging surfaces like Kynar 500® PVD and vehicles, such as tractor-trailers, as well as windows, doors, siding, curtain walls, roofs, fiberglass and vinyl siding. It can be extruded in extreme temperatures (down to 0° F/ -18° C) with a unique polyether chemistry to eliminate out-gassing on green concrete and protect against discoloration when exposed to ultraviolet light. It will expand and contract with the changes in weather and temperature and will not crack. ULTIMATE MP Textured Sealant contains no solvents or isocyanates and is VOC-compliant. If touch-ups are necessary, it may be painted with a water-based (latex-based) paint one hour after application.

Features & Benefits


  • Ready to Use - No mixing or primer required; reduces labor and installation cost
  • Ultra Low VOC - VOC-compliant in all 50 states
  • Joint Movement Capability ± 35% - Remains permanently flexible
  • Textured Look - Perfect for stucco, concrete, brick and more!
  • Paintable - May be painted one hour after application
  • Wide Temperature Application Range - Suitable for all climates
  • Six textured colors perfect for stucco, concrete, brick and more

Specifications


    Application Guidelines


    • Application Temperature: Above 0°F (-18°C)
    • Service Temperature Range: -75°F to 300°F (-59°C to 149°C)
    • Method of Application: Cartridge/caulking gun
    • Tooling Time: For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity.
    • Working Surfaces: Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints.
    • Painting: WeatherMaster ULTIMATE MP is intended for exterior use. If used indoors, sealant may need to be painted. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
    • Cleanup: Uncured material may be cleaned with isopropyl alcohol or acetone. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
    • Coverage:
      Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
      10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

    Physical Properties


    • Type: Advanced polymer
    • Reactive VOC: 29.1 g/L
    • Solids : 97.77%
    • Weight Per Gallon : 10.9 lbs.
    • Viscosity : 960,000 cps
    • Flashpoint : Solvent free/Not applicable
    • Storage Life : 18 months in tightly closed containers below 75°F (24°C)

    Product SKUs


    Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
    880010370838800141003708388001110.1 Oz. Cartridge - White10.9012108
    880110370838801131003708388011010.1 Oz. Cartridge - Buff10.9012108
    880210370838802121003708388021910.1 Oz. Cartridge - Gray10.9012108
    880310370838803111003708388031810.1 Oz. Cartridge - Stone10.9012108
    880410370838804101003708388041710.1 Oz. Cartridge - Bronze10.9012108
    880510370838805191003708388051610.1 Oz. Cartridge - Cream10.9012108

    Caution Statement


    CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

    Warranty Statement


    Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.

    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

    2020 Bruck Street, Columbus, Ohio 43207
    CUSTOMER SERVICE 1-800-669-4583
    TECH SERVICE 1-800-347-4583
    www.titebond.com

    Franklin International